Standard headrail configuration also referred to as a 1-on-1 headrail, meaning there is one cellular shade on the headrail.
Allows two independently operated cellular shades to share one common headrail. Ideal for large window openings that will benefit from the increased light control of two shades. In addition two smaller shades are easier to operate than one large shade.
The shade is mounted inside the window opening for a clean, tailored look. When selecting the size of your blinds, enter the exact dimensions of your window opening. Do NOT enter the size of an old/existing blind. The factory will make the necessary deductions for a proper fit. Please make sure your window meets the minimum inside mount depth required to accommodate the brackets, or the flush mount depth if desired. Depth requirements can be found on the product page.
The shade is mounted on the wall or window trim outside and above the window, covering an area larger than the window opening. Outside mount is required if your window opening is not deep enough to install the blind as an inside mount or if you want to make your window appear larger than it is. When measuring your blinds make sure to adjust the size for proper overlap.
Standard lifting system with a crash proof cord lock mechanism used to raise and lower your shade to any position.
Allows for precise positioning of the shade while the continuous loop control remains the same length. Smooth Lift provides a smoother, quieter operating clutch mechanism as well as a contoured profile. Eliminates dangling cords, adding child safety and a neater appearance. Color-coordinated aluminum contoured headrail and bottomrail. Cord tension device must be mounted with tension on the cord for the shade to operate, required for added child-safety.
Top down bottom up provides a way to raise the shade from the bottom up, the traditional way, plus it also allows for the shade to be lowered from the top down to allow light in while maintaining privacy. There are two cords for operation, one on the left and one on the right.
FREE for a limited time. The Lift & Lock cordless option has a bottomrail that features a handle with a button for operation, that helps prevent typical shade spring back. Simply press and hold the button to easily lift or lower the shade, then release the button to lock in position. It also eliminates dangling cords, providing the ultimate solution for child safety and ease of use.
Standard cord lift length is 1/3 of the ordered height of the blind when the shade is in the fully lowered position. Cord will get longer as you raise the shade.
Custom cord lift length for taller windows, windows higher off the ground, or difficult to reach windows. Cord length is when the shade is in the fully lowered position. Cord will get longer as you raise the shade. Recommended that the ordered length is at least 4-feet off the ground and/or out of the reach of children.
Standard cord lift length is 1/3 of the ordered height of the shade. For Top Down Bottom Up corded shades, the length of the cord operating the bottom rail is determined when the bottom rail is in the fully lowered position, and the length of the cord operating the moving middle rail is determined when the moving middle rail is in the fully lowered position. Cords will get longer as you raise the related rail.
Custom cord lift length for taller windows, windows higher off the ground, or difficult to reach windows. Cord length affects both operating cords, when the associated shade rail is in the fully lowered position. Each cord will get longer as you raise the affected rail of the shade. Recommended that the ordered cord length is at least 4-feet off the ground and/or out of the reach of children.
Mounted on the wall or door to support the bottom rail of the shade, preventing the shade from swaying. Recommended for French Doors or for shades that you will never raise or lower.
Projects the back of the shade up to 2 3/8" from mounting surface and requires a 2" flat surface. Outside mount only.