Quantity and Measurements
Width (inches)
Height (inches)
Total Price as Configured
Product Color
Painted Slats
Stained Slats
Sun Kissed Oak
Sun Kissed Oak
Warm Chestnut
Warm Chestnut
Headrail Options
Standard Headrail

Standard headrail configuration also referred to as a 1-on-1 headrail, a single blind is on the headrail.

[$171.59 $94.37 (w/coupon)]

Allows two independently operated blinds to share one common headrail. Ideal for large window openings that one single blind cannot cover. Provides increased light control plus two smaller blinds are easier to operate than one large blind.

Mount Type
Inside Mount Illustration
Mount Type

The blind is mounted inside the window opening for a clean, tailored look. When selecting the size of your blinds, enter the exact dimensions of your window opening. Do NOT enter the size of an old/existing blind. The factory will make the necessary deductions for a proper fit. Please make sure your window meets the minimum inside mount depth required to accommodate the brackets, or the flush mount depth if desired. Depth requirements can be found on the product page.

The blind is mounted on the wall or window trim outside and above the window, covering an area larger than the window opening. Outside mount is required if your window opening is not deep enough to install the blind as an inside mount or if you want to make your window appear larger than it is. When measuring your blinds make sure to adjust the size for proper overlap.

Cord Lift Illustration
Lift Type

Standard lifting system with a crash proof cord lock mechanism used to raise and lower your blinds to any position.

[$63.07 $34.69 (w/coupon)]

The Lift & Lock Cordless provides additional child safety and ease of use. To operate simply press and hold the bottomrail button to easily raise or lower the blind, then release the button to lock the blind in position. Features an aluminum bottomrail color-coordinated to the slat color.

Cord Tilt Illustration
Tilt Type

Cord tilt consists of 2 cords that rotate the horizontal slats open or closed by pulling on either tilt cord. The cord pulley system allows for tighter closure of the slats. The tilt cords will coordinate with the lifting cords, providing a uniform appearance.

Lift Position
Tilt Position
Valance Options
Crown Valance
Valance Style
[Free - no extra charge!]

3 1/4" tall decorative crown valance. Included as a standard feature. Color coordinated to the slat color.

[Free - no extra charge!]

3 1/4" tall smooth valance with a curved face. Provides a simple, clean design. Color coordinated to the slat color.

No Side Returns
Valance Side Returns

Select this option if your mounting depth is at least 3" deep and you want a flush inside mount. If your window opening depth is not deep enough for a flush inside mount then we recommend the 1/2" side returns.

If you do not have enough depth for a flush inside mount then select this option. The valance will be wider than the blind and the side returns will provide a finished look covering the exposed headrail sides.

Designed to cover the sides of the headrail on outside mount blinds providing a clean, finished look.

[$5.45 $3.00 (w/coupon)]

Custom side returns made to the size required for your unique installation. View the measuring instructions for this product to properly measure for these side returns

Valance Clip Type

Hidden plastic valance clip that connects to the back of the valance and onto the headrail. Hidden from view from the front of the blind, providing a clean appearance.

[Free - no extra charge!]

This innovative valance clip attaches the valance to the blind with magnets that are hidden from view from the front of the blind, providing a clean appearance. Allows for easy removal and placement of the valance on the blinds. Recommended for extended durability. Not recommended for blinds mounted to doors.

Standard Valance Width (Outside Mount Shown)
Valance Width

Select this option for the standard valance width. The standard valance width is based on the selected mount type and valance side returns. This is the option selected for the majority of installations.

[$15.27 $8.40 (w/coupon)]

Intended to cover a single blind the custom valance will be made to a specific width unique to your installation. If selected you will be prompted to enter the exact valance width desired. Ideal for inside mount blinds that have a larger width at the top of the opening compared to the smallest width of the opening. Valances with a finished size over 96" wide will be center spliced (miter-cut).

[$15.27 $8.40 (w/coupon)]

Select this option for all of the blinds that will share this common valance. Price is per blind.
The common valance is intended to cover multiple side-by-side blinds. If selected you will be prompted to enter the total valance width. The valance width will be factory adjusted based on the side return type selected. Reference the measuring instructions for this product to properly measure for a common valance. Valances with a finished width over 96" wide will be center spliced (miter-cut).

Additional Options
Hold Down Brackets
Hold Down Brackets

Mounted on the wall or door to support the bottom rail of the blinds, preventing the blinds from swaying. Recommended for French Doors. Available on outside mounts only.

Spacer Blocks
Spacer Blocks

Spacer blocks are used with mounting brackets to provide 1/2" of additional space between the mounting surface and the blinds. Typically used for clearance when installing blinds above raised trim, molding or window framing. Available on outside mounts only.

Window Information (Optional)
Window Name
(Maximum of 15 letters/numbers)
Customer Notes (No Questions. Notes for You, Not for Us.)
Total Price as Configured