The shade is mounted inside the window opening for a clean, tailored look. When selecting the size of your blinds, enter the exact dimensions of your window opening. Do NOT enter the size of an old/existing blind. The factory will make the necessary deductions for a proper fit. Please make sure your window meets the minimum inside mount depth required to accommodate the brackets, or the flush mount depth if desired. Depth requirements can be found on the product page.
The shade is mounted on the wall or window trim outside and above the window, covering an area larger than the window opening. Outside mount is required if your window opening is not deep enough to install the blind as an inside mount or if you want to make your window appear larger than it is. When measuring your blinds make sure to adjust the size for proper overlap.
Best for Kids™ - Traditional spring loaded roller allows you to raise and lower your shade by gently tugging on the bottom of the shade. Cordless design provides child safe operation.
The continuous cord loop clutch system easily lifts large shades while the continuous cord loop remains the same length. Allows for precise positioning of the shade. Pulling the chain in one direction will raise the shade and pulling the chain in the opposite direction will lower the shade. Comes with a cord tension device for child-safety, that must be mounted for the shade to operate properly.
The plastic beaded nylon cord is color-coordinated to the shade fabric and it is extremely durable.
The nickel plated steel beaded chain is a popular choice for commercial spaces or homes with an industrial/modern decor.
Best for Kids™ - Operates likes a standard spring roller shade when lowered but will automatically raise smoothly and stop at the top of the window with a slight "tug and release" on the bottom of the shade. Features a built-in adjustable stop device that stops the shade at the correct top position when the shade is raised. Eliminates dangling cords for child safety and provides a clean look. Comes on a standard white headrail that can be top or back mounted using a clip-on tension bracket for installation. Cannot be side-mounted.
Best for Kids™ - Simple push button motorization. The top and bottom limits are preset based on the ordered shade height, use the middle button to set your favorite position. A rechargeable battery is concealed inside the roller tube. Charging port is built into the wand. Portable charger is a separately priced option. Will operate for 6 months between charges based on average use. Child safe cordless operation.
The portable charger plugs directly into the the wand control to recharge the internal battery. Order at least one charger for all of your PowerWand controlled shades.
Shares a charger from another shade on this order or a previous order. All PowerWand controlled shades must have access to a charger.
Best for Kids™ - Radio Frequency motor with a rechargeable battery that is concealed inside the roller tube, no external battery required. Easy to access charging port is on the end of the motor. Shades are programmed at the factory with up and down stop limits. Personal favorites position can be set after installation. Includes motor and battery. Child safe cordless operation.
Motor is inside the roller tube on the right, as you face the shade. Easy to access charging port is on the end of the motor.
Motor is inside the roller tube on the left, as you face the shade. Easy to access charging port is on the end of the motor.
Shares a multiple channel remote (5-channel or 6-channel) from another shade on this order. Select the line item number of the shade with the shared multi-channel remote. All shades must have access to a remote control.
Five (5) channel RF remote control features 5 individual frequency channels and an "All" channel that operates all the shades at once. Includes a holder that can be mounted to the wall. Range of approximately 80 feet. White color. Remote uses 3V battery, included.
Five (5) channel RF remote control features 5 individual frequency channels and an "All" channel that operates all the shades at once. Includes a holder that can be mounted to the wall. Range of approximately 80 feet. Black color. Remote uses 3V battery, included.
Six (6) channel RF timer remote control combines the functionality of a 6 channel hand-held control with the convenience of a programmable timer. Allows for 18 different scheduled actions. Manual function disables the timer, then operates as a remote. Includes holder that can be mounted to the wall. Range of approximately 80 feet. Available in white.
The plug-in charger plugs directly into the the charging port located on the end of the motor to recharge the internal battery. Charger cord is approximately 20ft long. Order at least one charger for all of your Simplicity Rechargeable Motorization controlled shades.
Optional Solar Charging Power Panel uses low light harvesting technology to power your shades. Can only be used on one shade, cannot be shared between multiple shades. Solar power panel measures 18.5" x 1.5" and includes mounting brackets.
Shares a plug-in charger from another shade on this order or a previous order. All Simplicity Rechargeable Motorization controlled shades must have access to a charger.
Select this option if you have no need for smart home integration or shade control with your phone, tablet or PC.
The Simplicity Smart Controller powered by NEO Smart Blinds App is a small device that you install in your home that allows you to set automatic opening and closing times for all Simplicity motorized shades. You also have the ability to control your motorized shades from a phone, tablet or PC anywhere in world. Easily integrated with Amazon Alexa, Google Assistant, and other third party home systems. Free downloadable app works with Apple® and Android® devices. Requires a 2.4GHz WiFi (IEEE 802 11b/g/n) WiFi signal and WPA-PSK or WPA2-PSK WiFi security.
Best for Kids™ - Radio Frequency motor with a rechargeable battery that is concealed inside the roller tube, no bulky, external battery pack. Automate’s core motor line, Li-Ion, utilizes state of the art lithium ion battery technology integrated with the shades. Motor charging cable is on the end of the motor. Shades are programmed at the factory with up and down stop limits. Personal favorites position can be set after installation. Includes motor and battery. Multiple motor options available. Child safe cordless operation.
Motor is inside the roller tube on the right, as you face the shade. Charging cable is on the end of the motor.
Operates roller shades up to 108" Width and 120" Height (90 sq-ft) on a 1 1/2" roller tube. Size limitations may vary based on shade fabric.
Operates roller shades up to 120" Width and 120" Height on a 2" roller tube. Size limitations may vary based on shade fabric.
Operates roller shades up to 144" Width and 144" Height on a 2 1/2" or 3 1/4" roller tube (determined by shade fabric and size). Size limitations may vary based on shade fabric.
Shares a 15-channel remote from another shade on this order. Select the line item number of the shade with the shared 15-channel remote. All shades must have access to a remote control.
One (1) channel RF remote control intended for operating the up/down lift functions on one shade. The motor and remote have been pre-set at the factory. Range is approximately 90 feet or up to 400 feet of unobstructed space.
Fifteen (15) channel RF remote control can operate multiple shades and/or multiple groups of shades. Has leveling control along with the ability to hide unused channels. All shades programmed to the same remote will automatically respond to channel 0. Range is approximately 90 feet or up to 400 feet of unobstructed space.
The plug-in charger plugs directly into the the charging port located on the end of the motor to recharge the internal battery. Charger cord is approximately 12ft long. Order at least one charger for all of your Automate Rechargeable Motorization controlled shades.
Upgrade the Li-Ion motors to include Automate’s industry leading crystal technology to maximize sun ray absorption in a wide array of locations and orientations. Smaller design and improved performance compared to V1. Ensures continuous power, even if small sections of the panel are obstructed. A completely off-grid system that virtually never needs attention. Using a solar energy source means you can run your motorized shades sustainably for years to come.
Shares a plug-in charger from another shade on this order or a previous order. All Automate Rechargeable Motorization controlled shades must have access to a charger.
Extension wire is not required.
48-inch extension wire for use with the plug-in charger.
96-inch extension wire for use with the plug-in charger.
Select this option if you have no need for smart home integration or shade control with your smart phone/tablet.
The Automate Pulse 2 hub provides the heartbeat of the Automate smart home experience and unlocks the luxury of automated shade control. With WiFi built-in, simply plug in where convenient and connect to your local wireless network. Automate shades can then be controlled from your smart phone/tablet, via the free downloadable app, or with voice control via Google Assistant, Amazon Alexa and Apple HomeKit. Range of about 100 feet. Connect up to 30 devices per hub. Up to 5 locations per account. Up to 20 Rooms and Scenes and Timers per Location. Compatible with Apple Home, Google Home, Amazon Alexa and IFTTT, as well as Smart Home Automation Systems Savant, Control4, Crestron, AMX, Elan.
The shade material rolls off the back of the roller, allowing the shade to hang closer to the window. Best option for room darkening situations; provides optimal light control. The backside of the shade material will be visible on the roll.
The shade material rolls off the front of the shade, similar to a waterfall, covering and hiding the roller tube. The shade material hangs further away from the window providing additional clearance for any obstacles if needed. Provides less light control compared to standard roll.
No valance, the roller shade is visible, meaning the roller is exposed, thus the term "open roll".
The curved cassette valance conceals the roller and control mechanism to provide a clean appearance. Comes standard with a matching fabric insert, is available in two sizes (Cassette 100 and Cassette 120), and is available in five colors. The valance snaps easily into mounting clips, providing easier installation than a standard roller shade. Cannot be side mounted.
The Cassette 100 measures 3.72" depth and 3.10" height. Available on widths up to 108" and heights up to 96".
The Cassette 120 measures 4.43" depth and 3.88" height. Available on widths up to 132" and heights up to 120".
Top your premium roller shade with a stylish and modern flat aluminum square fascia. The square fascia is offered in 3" and 4" sizes and is available in five colors. 3" Fascias are available up to 108" wide and will accommodate shades up to 84" in height; 4" Fascias are available up to 132" wide and will accommodate shades up to 120" in height.
The 3" Square Fascia is available on roller shades up to 108" wide and up to 84" in height.
The 4" Square Fascia is available on roller shades up to 132" wide and up to 120" in height.
Price based on fascia size. Top your premium roller shade with a stylish and contemporary curved aluminum fascia. The curved fascia is offered in 3" and 4" sizes and is available in five colors. 3" Fascias are available up to 108" wide and will accommodate shades up to 84" in height; 4" Fascias are available up to 132" wide and will accommodate shades up to 120" in height.
The 3" Curved Fascia is available on roller shades up to 108" wide and up to 84" in height.
The 4" Curved Fascia is available on roller shades up to 132" wide and up to 120" in height.
Price based on fascia size. A curved aluminum fascia that is wrapped in the roller shade fabric providing a uniform appearance. Offered in 3" and 4" sizes and the underlying fascia is available in five colors. 3" Fascias are available up to 108" wide and will accommodate shades up to 84" in height; 4" Fascias are available up to 132" wide and will accommodate shades up to 120" in height.
The 3" Fabric Wrapped Curved Fascia is available on roller shades up to 108" wide and up to 84" in height.
The 4" Fabric Wrapped Curved Fascia is available on roller shades up to 132" wide and up to 120" in height.
Heat-sealed hem pocket provides a clean and classic appearance. An aluminum weight slat is inside the hem pocket, unless an optional Higbee Button style pull type is selected, then the aluminum hem slat is replaced with a wood hem slat.
This modern aluminum hem bar will complete the contemporary look of your roller shade. Available in five colors; Includes a color coordinated end cap for a finished look.
Shade fabric wraps around the front of the hem bar; Selected hem bar color shows on the back. Hem bar is available in five colors; Includes a clear endcap.
Standard option. Pulls are only available on the Spring Roller (Cordless) lift type.
Clear hem grip that protects your shade during normal operation.
White hem grip that protects your shade during normal operation.
Decorative white rayon ring pull. Attaches to a wooden hem slat using a button covered screw (Higbee Button). A wooden hem slat replaces the standard aluminum hem slat. Pulls cannot be attached to an aluminum hem slat.
Decorative ivory rayon ring pull. Attaches to a wooden hem slat using a button covered screw (Higbee Button). A wooden hem slat replaces the standard aluminum hem slat. Pulls cannot be attached to an aluminum hem slat.
Standard orientation is the best choice in most situations. Fabric patterns will be oriented in the direction they were originally designed for. View the color images to determine the standard fabric orientation.
Railroaded fabrics are turned 90-degrees, effectively changing the fabric to run sideways, to allow for wider widths. Any pattern that ran vertically will now run horizontally and any pattern that ran horizontally will now run vertically. View the color images to determine the standard fabric orientation. Certain sizes may require the fabric to be railroaded. If you have any shades in a room that require a railroaded fabric then select it for all shades in that room so they match.