The shade is mounted inside the window opening for a clean, tailored look. When selecting the size of your blinds, enter the exact dimensions of your window opening. Do NOT enter the size of an old/existing blind. The factory will make the necessary deductions for a proper fit. Please make sure your window meets the minimum inside mount depth required to accommodate the brackets, or the flush mount depth if desired. Depth requirements can be found on the product page.
The shade is mounted on the wall or window trim outside and above the window, covering an area larger than the window opening. Outside mount is required if your window opening is not deep enough to install the blind as an inside mount or if you want to make your window appear larger than it is. When measuring your blinds make sure to adjust the size for proper overlap.
Best for Kids™ - Cordless top down bottom up combines the two most popular lift options in cellular shades. Cordless provides an easy and effortless way of raising and lowering the shade. The top down bottom up provides a way to raise the shade from the bottom up, the traditional way, plus it also allows for the shade to be lowered from the top down to allow direct light in while maintaining privacy. The included clear snap-on handles attach to the bottom-rail and middle-rail for operation of the shade. Ideal for homes with children or pets. Internal lift cords are visible when the middle-rail is lowered.
Install the shade using the standard brackets and screws.
A unique tension mounting device that requires no tools. Product brackets come pre-attached to the no tools friction fit mounting device, which then uses tension/friction to secure itself to the inside sides of the window opening. Available in two sizes: 33mm depth and 55mm depth. Available in five colors: white, vanilla, bronze, gray, and black.Available on inside mount shades only. Sides and top/ceiling of the opening must be flat. Available in two sizes, select size based on mounting depth.
Friction Fit Rail has a depth of 33mm. Minimum window opening depth must be 1 3/8" of unobstructed flat mounting space at the top and sides. Recommended on window opening depths of 1 3/8" to 2 1/8".
Friction Fit Rail has a depth of 55mm. Minimum window opening depth must be 2 1/4" of unobstructed flat mounting space at the top and sides. Recommended on window opening depths of 2 1/4" and larger.