Customize your Essentials Light Filtering Fabric Roller Shades

The shade is mounted inside the window opening for a clean, tailored look. When selecting the size of your blinds, enter the exact dimensions of your window opening. Do NOT enter the size of an old/existing blind. The factory will make the necessary deductions for a proper fit. Please make sure your window meets the minimum inside mount depth required to accommodate the brackets, or the flush mount depth if desired. Depth requirements can be found on the product page.

The shade is mounted on the wall or window trim outside and above the window, covering an area larger than the window opening. Outside mount is required if your window opening is not deep enough to install the blind as an inside mount or if you want to make your window appear larger than it is. When measuring your blinds make sure to adjust the size for proper overlap.

Raises and lowers the shade using either a looped stainless steal chain or a plastic beaded nylon cord. Pulling the loop cord/chain in one direction will raise the shade and pulling the cord/chain in the opposite direction will lower the shade. Uses a clutch system for reliable performance. The looped cord stays at the same length regardless of the position of the shade. Eliminates the traditional dangling cord, adding child safety and a neater appearance. Includes a tension device at the bottom of the chain for added child safety.

Best for Kids™ - Just pull down by hand to lower the shade, or allow the shade to raise slowly on its own with a slight pull on the bottomrail. Cordless handle(s) included to help keep the fabric-wrapped bottomrail clean. Shades 42" width or less include one handle, shades over 42" width include two handles.

Best for Kids™ - Simple push button motorization using the attached wand control. The top and bottom limits are preset based on the ordered shade height, use the middle button to set your favorite position. A rechargeable battery is concealed inside the roller tube. Charging port is built into the wand. Portable charger is a separately priced option. Will operate for 6 months between charges based on average use. Child safe cordless operation.

Best for Kids™ - Radio Frequency motor with a rechargeable Li-ion battery that is concealed inside the roller tube. Charging port is located on the motor head at the end of the roller tube. Shades are programmed at the factory with up and down stop limits. Personal favorites position can be set after installation. Includes motor and battery. Child safe cordless operation.

The shade material rolls off the back of the roller, allowing the shade to hang closer to the window. Best option for room darkening situations; provides optimal light control. The backside of the shade material will be visible on the roll.

The shade material rolls off the front of the shade, similar to a waterfall, covering and hiding the roller tube. The shade material hangs further away from the window providing additional clearance for any obstacles if needed. Provides less light control compared to standard roll. See "Product Specifications" for important mounting information when ordered as Spring Roller (Cordless).

A valance headrail system that conceals the roller and control mechanism to provide a clean appearance. Features a matching fabric insert on the front, using the same fabric as the shade. Not available with reverse roll.

The fabric wrapped hem bar is an upgraded hem bar where the front/face of the hem bar is wrapped in the shade fabric for a sleek finished appearance. Provided as the standard hem option at no extra cost.

Two magnets are attached to the backside of the hem bar that magnetize to metal catch plates that are screwed to the mounting surface. Secures the bottom rail of the shade, preventing the shade from swaying. Magnet and catch are silver color. Available on outside mount only.

Select this option if you have no need for privacy side channels.

High quality PVC privacy side channels that offer additional privacy and light control. Mounted to the sides and sill of the window opening. Can be mounted behind or in front of the shade material. Available in five colors: white, vanilla, bronze, gray, and black. Available on inside mount only.

Install the shade using the standard brackets and screws that are intended for the options ordered.

A unique tension mounting device that requires no tools. Product brackets come pre-attached to the no tools friction fit mounting device, which then uses tension/friction to secure itself to the inside sides of the window opening. Available in five colors: white, vanilla, bronze, gray, and black.

Only available on Inside Mount shades with the Curved Cassette Valance and the PowerWand Motorized Lift or the AMP Rechargeable Li-ion Motorization Lift. Sides and top/ceiling of the opening must be flat.