Customize your Essentials Room Darkening Dual Sheer Shades

The shade is mounted inside the window opening for a clean, tailored look. When selecting the size of your blinds, enter the exact dimensions of your window opening. Do NOT enter the size of an old/existing blind. The factory will make the necessary deductions for a proper fit. Please make sure your window meets the minimum inside mount depth required to accommodate the brackets, or the flush mount depth if desired. Depth requirements can be found on the product page.

The shade is mounted on the wall or window trim outside and above the window, covering an area larger than the window opening. Outside mount is required if your window opening is not deep enough to install the blind as an inside mount or if you want to make your window appear larger than it is. When measuring your blinds make sure to adjust the size for proper overlap.

Raises and lowers the shade using either a looped stainless steal chain or a plastic beaded nylon cord. Pulling the loop cord/chain in one direction will raise the shade and pulling the cord/chain in the opposite direction will lower the shade. Uses a clutch system for reliable performance. The looped cord stays at the same length regardless of the position of the shade. Eliminates the traditional dangling cord, adding child safety and a neater appearance. Includes a tension device at the bottom of the chain for added child safety.

Best for Kids™ - Effortless positioning of the shade by simply raising and lowering the shade to the desired position. Two handles are sent with every cordless lift shade and should be attached to the bottom rail once the shade has been installed. Optional extension pole is available to use when shades are hard to reach.

Best for Kids™ - Simple push button motorization using the attached wand control. The top and bottom limits are preset based on the ordered shade height, use the middle button to set your favorite position. A rechargeable battery is concealed inside the roller tube. Charging port is built into the wand. Portable charger is a separately priced option. Will operate for 6 months between charges based on average use. Child safe cordless operation. Wand is available in the following colors: White, Vanilla, Gray, Bronze, and Black (wand color is pre-selected by the manufacturer based on fabric color).

Best for Kids™ - Radio Frequency motor with a rechargeable Li-ion battery that is concealed inside the roller tube. Charging port is located on the motor head at the end of the roller tube. Shades are programmed at the factory with up and down stop limits. Personal favorites position can be set after installation. Includes motor and battery. Child safe cordless operation.

A valance headrail system that conceals the roller and control mechanism to provide a clean appearance. Features a matching fabric insert on the front, using the same fabric as the shade. Cassette color is pre-determined by the manufacturer based on the ordered fabric color.

The fabric wrapped hem bar is an upgraded hem bar where the front/face of the hem bar is wrapped in the shade fabric for a sleek finished appearance. Bottom rail and end cap color is pre-selected based on the fabric color. Provided as the standard bottom rail option at no extra cost.

Install the shade using the standard brackets and screws that are intended for the options ordered.

A unique tension mounting device that requires no tools. Product brackets come pre-attached to the no tools friction fit mounting device, which then uses tension/friction to secure itself to the inside sides of the window opening. Available in five colors: white, vanilla, bronze, gray, and black.

Only available on Inside Mount shades with Cordless Lift, PowerWand Motorized Lift, or AMP Rechargeable Li-ion Motorization Lift. Sides and top/ceiling of the opening must be flat.

Select this option if you have no need for privacy side channels.

High quality PVC privacy side channels that offer additional privacy and light control. Mounted to the sides and sill of the window opening. Can be mounted behind or in front of the shade material. Available in five colors: white, vanilla, bronze, gray, and black. Available on inside mount only.

Two magnets are attached to the backside of the hem bar that magnetize to metal catch plates that are screwed to the mounting surface. Secures the bottom rail of the shade, preventing the shade from swaying. Magnet and catch are silver color. Available on outside mount only.

Option picture is showing the magnetic hold down brackets on a roller shade hem bar.

Spacer blocks are used with mounting brackets to provide 3/8" of additional space between the mounting surface and the blinds. Typically used for clearance when installing blinds above raised trim, molding or window framing. Available on outside mounts only.

This shade is not side by side with another shade, so the fabric band alignment does not matter.

This shade is mounted side by side with one or more shades from this order and fabric band alignment between the shades is preferred. All side by side shades must be the exact same height, fabric/color, and options. Side by side alignment will be attempted by the manufacturer but it is not guaranteed.