Customize your Premium Faux Wood Vertical Blinds

The blind is mounted inside the window opening for a clean, tailored look. When selecting the size of your blinds, enter the exact dimensions of your window opening. Do NOT enter the size of an old/existing blind. The factory will make the necessary deductions for a proper fit. Please make sure your window meets the minimum inside mount depth required to accommodate the brackets, or the flush mount depth if desired. Depth requirements can be found on the product page.

The blind is mounted on the wall or window trim outside and above the window, covering an area larger than the window opening. Outside mount is required if your window opening is not deep enough to install the blind as an inside mount or if you want to make your window appear larger than it is. When measuring your blinds make sure to adjust the size for proper overlap.

Best for Kids™ - A wand control is used to traverse the vertical open and close by guiding it from one end of the headrail to the other. Rotating the wand controls the tilting of the louvers for privacy and light control. The wand control is recommended for homes with small children and/or pets. Wand color is white. Default wand length is 36". Optional wand lengths are available at the time of order (cannot be changed later).

A loop cord is used to traverse the vertical vanes along the track to open and close the vertical. A loop beaded chain is used to rotate the vanes, tilting them open and closed for light and privacy control. The loop cord and loop chain are approximately 66% of the product height.

Standard length for the traverse cord is approximately 66% of the ordered height of the blind. Safety tension device must be mounted for the cord to operate.

Custom traverse cord length for taller windows, windows higher off the ground, or difficult to reach windows. Loop cord remains the same length during operation of the blind. Safety tension device must be mounted for the cord to operate.

Standard wand length is 36" for all vertical heights. Optional wand lengths of 48", 60", and 72" are available at the time of order (cannot be changed later).

Custom wand length is available for taller/shorter windows, windows higher off the ground, or difficult to reach windows.

Standard length for the tilt chain is approximately 66% of the ordered height of the blind. Safety tension device must be mounted for the chain to operate.

Custom tilt chain length for taller windows, windows higher off the ground, or difficult to reach windows. Chains will lengthen/shorten when blinds are tilted. Recommended that the ordered length is at least 4-feet off the ground and/or out of the reach of children.

When the blind is drawn open the vertical vanes will stack to the same side of the window that the controls are on.

Also referred to as Opposite Draw. When the blind is drawn open the vertical vanes will stack to the opposite side of the window that the controls are on.

The blind will open from the middle and vanes will stack evenly on both sides of the window. Controls can be positioned on either side.

The blind will open from the sides to the middle and vanes will stack in the center of the opening. Controls can be positioned on either side.

Decorative valance with square side-returns conceals the headrail track system. 3 1/2" high valance with dust cover and matching vane insert. Inside mounts have 1 1/2" side returns and outside mounts have 3 1/2" side returns. Valance is wider than the ordered width measurement. Notched dust cover fits into window for easy inside mount installation.

No extra replacement vanes will be included with the order.

One extra replacement vane. Useful for possible future replacement of a damaged vane. Great for homes with small children and/or pets. Discounted vane price for ordering at the same time as the vertical blind.

Three extra replacement vane. Useful for possible future replacement of damaged vanes. Great for homes with small children and/or pets. Price per vane is less for ordering 3 vanes.