Quantity and Measurements
Quantity
Width (inches)
Height (inches)
Total Price as Configured
Product Color
True White
Color
  
True White
True White
White Gloss
White Gloss
White Satin
White Satin
Yellow White
Yellow White
Almost Gloss White
Almost Gloss White
Navajo
Navajo
Matte White
Matte White
Snow Cap
Snow Cap
Snow Crystal
Snow Crystal
Almond
Almond
Faded Taupe
Faded Taupe
Taupe
Taupe
Beige
Beige
Nut Brown
Nut Brown
Alabaster
Alabaster
Vanilla
Vanilla
Dune
Dune
Char Brown
Char Brown
Hunter Green
Hunter Green
True Blue
True Blue
Garnet Red
Garnet Red
Smokey Grey
Smokey Grey
Dove Grey
Dove Grey
Grey
Grey
Mineral Grey
Mineral Grey
Raw Umber
Raw Umber
Textured Aluminum
Textured Aluminum
Brushed Aluminum
Brushed Aluminum
Black Satin
Black Satin
Mount Type
Inside Mount Illustration
Mount Type

The blind is mounted inside the window opening for a clean, tailored look. When selecting the size of your blinds, enter the exact dimensions of your window opening. Do NOT enter the size of an old/existing blind. The factory will make a 1/2" deduction off the ordered width for a proper fit. Please make sure your window meets the minimum inside mount depth required to accommodate the brackets, or the flush mount depth if desired. Depth requirements can be found on the product page.

The blind is mounted on the wall or window trim outside and above the window, covering an area larger than the window opening. Outside mount is required if your window opening is not deep enough to install the blind as an inside mount or if you want to make your window appear larger than it is. When measuring your blinds make sure to adjust the size for proper overlap.

Controls
Cordless Lift
Lift Type

Best for Kids™ - The cordless lift is operated by lifting the bottom rail to raise it and pulling on the bottom rail to lower it. Ideal for homes with children or pets, cordless lift completely eliminates the dangling cord hazards of traditional cord-controlled window blinds.

Wand Tilt Illustration
Tilt Type

Best for Kids™ - Traditional method of tilting the slats open or closed. When you rotate the wand in one direction, the slats open, and when you rotate it in the opposite direction, the slats will close.

Wand Tilt Position
Wand Length
Standard Length

Standard wand length is determined by the ordered height of the blind, as shown below.
• Blind height up to 36" has 12" wand.
• Blind height 36 1/8" to 60" has 20" wand.
• Blind height 60 1/8" to 70" has 30" wand.
• Blind height 70 1/8" to 80" has 40" wand.
• Blind height 80 1/8" to 90" has 50" wand.
• Blind height over 90" has 60" wand.

Custom Length

Custom wand length is available for taller/shorter windows, windows higher off the ground, or difficult to reach windows.

Additional Options
Hold Down Brackets
Hold Down Brackets

Mounted on the wall or door to support the bottom rail of the blinds, preventing the blinds from swaying. Recommended for French Doors. Available on outside mount only.

Window Information (Optional)
Window Name
(Maximum of 15 letters/numbers)
Customer Notes (No Questions. Notes for You, Not for Us.)
Total Price as Configured