Customize your Simply Cordless 2" Faux Wood Blinds

The blind is mounted inside the window opening for a clean, tailored look. When selecting the size of your blinds, enter the exact dimensions of your window opening. Do NOT enter the size of an old/existing blind. The factory will make a 1/2" deduction off the ordered width for a proper fit. Please make sure your window meets the minimum inside mount depth required to accommodate the brackets, or the flush mount depth if desired. Depth requirements can be found on the product page.

The blind is mounted on the wall or window trim outside and above the window, covering an area larger than the window opening. Outside mount is required if your window opening is not deep enough to install the blind as an inside mount or if you want to make your window appear larger than it is. When measuring your blinds make sure to adjust the size for proper overlap.

Best for Kids™ - The cordless lift is operated by lifting the bottom rail to raise it and pulling on the bottom rail to lower it. Ideal for homes with children or pets, cordless lift completely eliminates the dangling cord hazards of traditional cord-controlled window blinds.

Best for Kids™ - Traditional method of tilting the slats open or closed. When you rotate the wand in one direction, the slats open, and when you rotate it in the opposite direction, the slats will close. Wand Tilt is available on the left side only. Blinds less than or equal to 30" Width will have a 20" wand; Blinds greater than 30" Width will have a 24" wand.

A 3 1/4" Flat Valance is provided as a standard option. The flat valance provides a modern and clean appearance. Outside mount side-returns are pictured.

Select this option if your mounting depth is at least 3" deep and you want a flush inside mount. Valance will be approximately 1/8" less width than your ordered width. If your window opening depth is not deep enough for a flush inside mount then we recommend that you order the valance with side returns.

If you do not have enough depth for a flush inside mount then select this option. The valance will be 1" wider than the blind width to allow the side returns to extend beyond the brackets, providing a finished look by covering the exposed brackets and headrail sides.

Designed to cover the sides of the headrail on outside mount blinds providing a clean, finished look. The valance will be 1" wider than the blind width, allowing the side returns to extend beyond the brackets, providing a finished look by covering the exposed headrail and brackets.

Mounted on the wall or door to support the bottom rail of the blinds, preventing the blinds from swaying. Recommended for French Doors. Recommended on outside mount blinds. Included with all orders.

Spacer blocks are used with mounting brackets to provide 3/8" of additional space between the mounting surface and the blinds. Typically used for clearance when installing blinds above raised trim, molding or window framing. Available on outside mounts only.