Measuring your windows for blinds and shades is easy and we provide these measuring instructions to help make it even easier for you. If you have any questions regarding how to measure properly for our products then please contact us.
Important rules to follow while measuring your windows:
- Always use a steel measuring tape for accuracy.
- Write down WIDTH first then HEIGHT. Do not list them out of order.
- Measure ALL of your windows, even if they appear to be the same size.
- Never measure an existing blind/shade for your measurements.
There are two mount types to consider, Inside Mount and Outside Mount. Please note that mounting onto a door is considered an outside mount.
Inside Mount
Inside mounted blinds and shades are mounted within the window frame providing a clean, custom look. A great way to leave an attractive window trim exposed. Please note that if your mounting space is restricted in width or it is between two stationary objects then that is most likely also considered an inside mount because the inside mount deduction may be required for the product to fit. Please note that if your mounting space is restricted in width or it is between
two stationary objects then that is most likely also considered an inside mount because the inside mount deduction may be required for
the product to fit.
|
To properly mount a blind or shade inside the window's frame, your frame must be deep enough to
accommodate the mounting brackets. If the depth of your window's frame is not equal to or greater than the
minimum mounting depth, you will need to measure for an outside mount and mount your product outside the
window frame.
Minimum Inside Mounting Depth is the minimum flat depth required to mount a blind or shade inside the window
opening. This depth allows for enough space for the brackets to be mounted. A portion of the blind or
shade may protrude from the window opening.
Flush Inside Mounting Depth is the flat depth required to mount a blind so that it is fully recessed inside the window casing and no
portion of the blind or shade protrudes from the window frame. Obstructions such as window cranks, handles
and other items inside the window opening must be factored into your depth measurement.
|
|
|
|
Width
Measure the exact width of the window opening, across the TOP only, from left to right, inside the opening where you plan to mount the brackets
(rounded down to the nearest 1/8th inch). Write this measurement down. This is the width you will order.
Height
Measure the exact height of the opening from the inside top of the opening to the window sill/window bottom in THREE places: left, middle, right.
Take the largest/longest of the three measurements (rounded up to the nearest 1/8th inch). This is the height you will order.
Important:
Do not measure the width at the middle or bottom of the opening. Only measure the width across the inside of the opening at the top, from left to right, where you plan to
mount the brackets. The width measurement of your opening will most likely vary and be inaccurate if you measure anywhere else.
Important:
Do not take any deductions from your measurements. The factory will make a 1/8" deduction off the ordered width measurement to allow
for the proper mounting and operation of your shade.
Please note:
The roller shade's fabric width will be approximately 1" to 1 5/8" narrower than your ordered width based on your lift type. This is to allow
for bracket placement and proper operation. If you are concerned with the resulting light gap please measure for an outside mount. The casing around
your window will typically offset this deduction.
|
Outside Mount
Outside mounted blinds are mounted to the wall or the window trim outside of the window opening and cover
an area larger than the window itself. Provides greater light control and privacy. Perfect
for windows that lack the required depth for an inside mount.
|
|
|
|
Width
Measure the width of the area you wish to cover (left to right). This width is the "tip-to-tip" size of
the roller shade. The actual fabric width will be narrower than the ordered width determined by the lift type.
To cover a specific area, add the appropriate amount shown above based on your lift type to your ordered width for the desired fabric width. If space allows, provide at least 3" of fabric overlap beyond the window opening to ensure maximum light control, 1-1/2" to each side.
Important:
The ordered width is the "tip-to-tip" size of the roller shade. When adding to your measured width for fabric
coverage, please double check that you have the required space for mounting the roller shade.
Height
Measure the height of the area you wish to cover (top to bottom). You must have the minimum flat
mounting surface space above the window opening for proper bracket mounting. Provide enough overlap to the height to
accomodate the mounting space and to provide ample light control overlap below the bottom of the window.
Please note: If you have a window sill that protrudes at the bottom of the
window, adjust your height measurement so the blind rests on the sill.
|