Signature Fabric Vertical Blinds

Standard headrail track system. Traverse cord is standard with an optional up-charge wand control available. One-way draw, split draw, and reverse one-way draw options available. Metal strap track has 33% tighter stacking space providing greater viewing area on inside mount applications. Unique release lever allows stacked back vanes to be moved to the center of the window for easy and complete window cleaning.

Best for Kids™ - A wand control is used to traverse the vertical open and close by guiding it from one end of the headrail to the other. Rotating the wand controls the tilting of the louvers for privacy and light control. Recommended for homes with small children and/or pets. Only available with the Vistec Headrail System. Blind height up to 54" has 24" wand, blind height 54 1/8" to 72" has 36" wand, blind height 72 1/8" to 96" has 48" wand, blind height over 96" has 60" wand.

A loop cord is used to traverse the vertical vanes along the track to open and close the vertical. Two beaded chains are used to rotate the vanes, tilting them open and closed for light and privacy control. The loop cord is approximately 75% of the product height up to the length of the product, required to fully traverse the blind open and closed, this length cannot be changed. The tilt chains are approximately 33% of product height by default, a custom length can be ordered on an option below.

When the blind is drawn open the vertical vanes will stack to the same side of the window that the controls are on.

Also referred to as Opposite Draw. When the blind is drawn open the vertical vanes will stack to the opposite side of the window that the controls are on. Available with the Vistec headrail system only.

The blind will open from the middle and vanes will stack evenly on both sides of the window. Cord controls can be positioned at either end of the headrail. Wand can be on either side and will pull to the center when closed.

Weights are sewn into in a hem pocket at the bottom of each vane, allowing the vanes to free-hang without a stiff backing. Hem pocket is not sealed on all sides. Weights have no holes, creating a clean look.

The vane fabrics are inserted into channel panel inserts, which adds durability and helps extend the life of the vanes. The PVC backing also provides increased insulation, decreases the amount of light entering through the vanes, and provides a neutral color to the backside of the vanes. Available in white or ivory, each with a clear edge on front for the vane insert.

When selected, no valance will be included with your vertical blind, resulting in the headrail track system being visible.

Decorative valance with square side-returns conceals the headrail track system. 3 1/2" high PVC valance with dust cover helps block outside light and protect your blind. Valance vane insert matches the vertical vanes. 6" returns are standard but are not required for installation. Valance is cut 1" wider than blind ordered width. Notched dust cover fits into window for easy inside mount installation.

Decorative valance with round side returns conceals the headrail track system. 3 1/2" high PVC valance with dust cover helps block outside light and protect your blind. Round corners with continuous vane insert provides a sleek appearance. Valance vane insert matches the vertical vanes. 6" returns are standard but are not required for installation. Valance is cut 1" narrower than blind ordered width and when the corner pieces are connected the valance is 1" wider. Notched dust cover fits into window for easy inside mount installation.